UPHOLSTERY DISCUSSION BOARD
HOW TO UPHOLSTER FORUM

Rostov Upholstery Supplies Welcome, Guest. Please login or register.
November 21, 2017, 10:38:11 AM
How To Reupholster A Couch, Chair, Ottoman.
Recover Car And Boat Seats. DVDs
Foam Cutters $130+
1/2" and 3/8" crown staple guns- air and Maestri electric.
Upholstery Tools
Long Nose Staplers $124
Sunbrella Fabric     Complete line of Sunbrela fabrics. We also custom sew beautiful cushions from Sunbrella.
Custom Cushions     Custom cushions sewn at a high level of craftsmanship. Choose from fabrics and a range of quality foam.



: Check out CoachTrim's Advanced Leather Workshop and Basic Sewing Course on Suppliers Page
***Please click here www.facebook.com/upholster.upholstery and click "LIKE" for our UPHOLSTER Facebook business page (it will help me promote this free site)-Ken***



 
 EZ Foam Cutters with 240 volts and plugs for Australia, New Zealand and UK and EU.
SPECIAL 110V MODELS $130 (limited time!!) http://www.upholster.com/toolkits/Foam-cutter.html



+  My Community
|-+  General Upholstery Questions and Comments
| |-+  General Discussion
| | |-+  CAMIE FOAM & FABRIC ADHESIVE CLEAR
« previous next »
: [1]
: CAMIE FOAM & FABRIC ADHESIVE CLEAR  ( 2725 )
Mike8560
Guest


« : November 20, 2011, 05:32:32 PM »

has anyone used this ?
JuneC
YaBB God
*****

Karma: +0/-0
: 3996



« #1 : November 20, 2011, 05:52:00 PM »

Yes.  I love that it cleans off the FACE of vinyl with denatured alcohol.  I don't like that it never loses it's tack.  It holds pretty well, but as far as I'm concerned, it's great for temporary tacking of foam to foam, foam to vinyl, etc but not forever.  For a permanent, dry bond, I like Keyston high-temp adhesive in the spray can.  Holds like a SOB.  For very large areas, I like DAP Weldwood landau adhesive (I spray it on with a wanna-be Binks pot and compressor).  That stuff is amazing!  Wear your respirator  :-\  For foam to foam I like K-Grip (sprayed on with glue pot and compressor as well). 

Now maybe my Cami experience is because of the hot/humid S. Florida environment.  Any of you guys up north have the same experience as me?

June

"Horse sense is the thing a horse has which keeps it from betting on people."

     W. C. Fields
sofadoc
YaBB God
*****

Karma: +1/-0
: 4301


All types of upholstery.....except cars and boats.


« #2 : November 20, 2011, 05:53:59 PM »

I use the Camie 313B clear adhesive in the 1 gallon can. I apply it with a K-Grip sprayer. I use it for bonding foam, and glueing batting to foam.
With the K-grip sprayer, I don't have to clean the nozzle after each use.

"Perfection is the greatest enemy of profitability" - Mark Cuban
Mike8560
Guest


« #3 : November 20, 2011, 07:03:17 PM »

i have some wall to add  hulliner and may need top glue viunyl to 1/4" foam
were do you get the keyston june miami i think has weldwood
« : November 20, 2011, 07:46:00 PM Mike8560 »
Mike8560
Guest


« #4 : November 20, 2011, 08:09:19 PM »

is this it june?
http://www.miamicorp.com/default.aspx?page=item+detail&itemcode=DAP233

ive used s 16 i think in gallons and was able to brush ity on doing carpet. id like to brush it on in the boat as to not make a mess miami  listed it as brushable what do you think?
JuneC
YaBB God
*****

Karma: +0/-0
: 3996



« #5 : November 20, 2011, 09:18:45 PM »

Yep.  Great stuff.   Thins with mineral spirits if it's absolutely necessary.  Don't thin unless you HAVE to.  I apply like Darren suggests (or was it Russell???)).  Ignore the directions.  Spray both surfaces, let dry for a day, then position (both pieces dry lets you move around at will), then re-activate with a heat gun.  Works a treat!  Holds damn near forever!

June

"Horse sense is the thing a horse has which keeps it from betting on people."

     W. C. Fields
Mike8560
Guest


« #6 : November 20, 2011, 10:06:14 PM »

What do you lay the foam and vinyl together after a day of waiting and heat the outside of the vinyl with heat? Or lift the. Into and heat the glue directly?
JuneC
YaBB God
*****

Karma: +0/-0
: 3996



« #7 : November 20, 2011, 10:53:53 PM »

I don't laminate then install.  I put up the foam on the hull, followed with the vinyl.  If the hull was very flat, then you could laminate first, then install, but as we mariners all know, if there's a curve, the vinyl will want to crease.  So, to get the curve all good. I put up the foam first.  Let cure for a day, then vinyl. 

NOTE to ALL: spraying glue inside a boat will not only get you high as a kite and ruin your lungs, it creates a deadly explosive environment.  Wear a respirator (Home Depot sells one with VOC filters) so you don't lose your sense of reality.  Open every hatch and porthole that exists, and use two fans - one blowing in, and at the other end, one blowing out.  Do NOT let the fumes build up.  Stop and let the air change periodically. 

June

"Horse sense is the thing a horse has which keeps it from betting on people."

     W. C. Fields
: [1]  
« previous next »
:  



Latex Mattress    Foam Order allows you to design your own latex mattress using layers of certified natural and organic components.
Organic Mattress     Foam Order makes a wonderful organic mattress using certified natural and organic components. Choose your own firmness.
SMF 2.0.14 | SMF © 2017, Simple Machines