Rostov Upholstery Supplies Welcome, Guest. Please login or register.
October 17, 2019, 04:48:19 PM
How To Reupholster A Couch, Chair, Ottoman.
Recover Car And Boat Seats. DVDs
Foam Cutters $130+
1/2" and 3/8" crown staple guns- air and Maestri electric.
Upholstery Tools
Long Nose Staplers $124
Sunbrella Fabric     Complete line of Sunbrela fabrics. We also custom sew beautiful cushions from Sunbrella.
Custom Cushions     Custom cushions sewn at a high level of craftsmanship. Choose from fabrics and a range of quality foam.

: Check out CoachTrim's Advanced Leather Workshop and Basic Sewing Course on Suppliers Page
***Please click here www.facebook.com/upholster.upholstery and click "LIKE" for our UPHOLSTER Facebook business page (it will help me promote this free site)-Ken***

 EZ Foam Cutters with 240 volts and plugs for Australia, New Zealand and UK and EU.
SPECIAL 110V MODELS $130 (limited time!!) http://www.upholster.com/toolkits/Foam-cutter.html

+  My Community
|-+  The Business Of Upholstery
| |-+  The Business Of Upholstery
| | |-+  What sewing machine would they use?
« previous next »
: [1]
: What sewing machine would they use?  ( 254 )
Sr. Member

Karma: +1/-0
: 292

« : April 12, 2019, 07:48:08 AM »

Got a wing back rocker with portable cushions (back for example is large center & small wing back
cushions on each side of the center cushion.  Cushion has loops along top that hook on the post.

Fairly common type chair but noticed the back rest cushion was formed by slipping the 2 1/2 plus
thick foam in the cover and then sewing the two vertical seams to form the large center and two wing
cushion look.

The foam is not all that soft and I am wondering what machine would sew that thickness?  None
of my walking feet machines will.

First, I thought about just rejecting the job, then decided to run the foam through the saw to get the
seams forming the wing back parts (2 seams like I mentioned) are formed, required to only go through
the fabric.  This way, the three foam pockets are formed so the foam pieces (3) can be slipped in from
the bottom.

Sure couldn't believe an upholsterer would have such a machine.

Found a tag that stated "made by" or "sold by" :  Towne Square Furn in Hillsboro, Texas 76645.

The "sold by" is likely what applies.  However, it didn't look real cheap to be from Asia??

One thing for sure, I can't sew through that thick foam plus the fabric!!

Never know,

« : April 13, 2019, 07:47:13 AM baileyuph »
YaBB God

Karma: +3/-0
: 3194

North Central Florida

« #1 : April 12, 2019, 08:03:48 AM »

We have an Singer industrial 111 machine and a Kenmore light industrial machine. I would not attempt sewing through 2-1/2" with either machine. Even if they could I think the seam would come out rather sloppy.

I do the method you suggested, sew the seam without the foam and then slip the foam in from the bottom. Maybe a layer of dacron to help fill it out.

We have also done this type cushion that doesn't form wings. It just lays flat against the back. On those Rose try's to talk the customer into replacing the seams with 6 buttons.

The list of furniture we no longer do keeps growing. I'm sure this style rocker will soon be added.
« : April 12, 2019, 08:06:41 AM kodydog »

There cannot be a crisis next week. My schedule is already full.
YaBB God

Karma: +2/-0
: 4544

All types of upholstery.....except cars and boats.

« #2 : April 12, 2019, 08:26:30 AM »

I do the method you suggested, sew the seam without the foam and then slip the foam in from the bottom.
Machines like the 111W, as well as other brands made before the 80's were built with a maximum stitch length of about 4.5 stitches per inch.

My Juki LU 1508, the newer version of the LU 563 will do 3 SPI. With a wide stitch length and a 24 needle, I can sew those two seams that you guys are talking about. The foam has a groove cut in it, so you're not really trying to sew through the entire 2.5" thickness.

But with delicate fabrics, I sew first, then stuff from the bottom as mentioned.

"Perfection is the greatest enemy of profitability" - Mark Cuban
YaBB God

Karma: +2/-0
: 3181

« #3 : April 13, 2019, 08:20:27 AM »

If you are going to sew the seams and then slide the foam into the pocket, you can wrap the foam in silk film (super thin plastic) and put your shop vac on one end to suction the foam down so it slides into the pocket with ease. This is the same technique when filling channels of the back of a chair or sofa.

I also remember seeing post bed type sewing machines that can sew these types of seams.



Sr. Member

Karma: +1/-0
: 292

« #4 : June 08, 2019, 08:14:02 AM »

Finished that job, wasn't easy because the opening for "inserting the two side foam fillers" was
at the bottom where filler was widest. 

I cut the sides (or wings) of the foam which yielded or transformed the foam filler into three pieces
finally got it in with slip-ease.

Oh, I also analyzed the factor foam and there was no groove where the two side seams were
made.  So, factory slipped the one piece into the cover and sewed it (both sides). 

Could they have used a roller feed on a post bed machine(foam was fairly dense)?

I would have to do Much more of that kind of work to justify buying that equipment.

Small custom shops would have to rethink their business to keep re-upholstery prices

BTW, I see some pretty high tech patterning & sewing in this "new furniture" today.  Factories
have the advantage of justifying with their volume. 

Which leads to the question:  "What is the future of the smaller custom shop in

I do auto also and do note the difference in technology used in manufacturing.  Their seaming with
all types of top stitching are perfect and can do it with significant time savings.

: [1]  
« previous next »

Latex Mattress    Foam Order allows you to design your own latex mattress using layers of certified natural and organic components.
Organic Mattress     Foam Order makes a wonderful organic mattress using certified natural and organic components. Choose your own firmness.
SMF 2.0.14 | SMF © 2017, Simple Machines