Rostov Upholstery Supplies Welcome, Guest. Please login or register.
August 21, 2019, 08:40:41 PM
How To Reupholster A Couch, Chair, Ottoman.
Recover Car And Boat Seats. DVDs
Foam Cutters $130+
1/2" and 3/8" crown staple guns- air and Maestri electric.
Upholstery Tools
Long Nose Staplers $124
Sunbrella Fabric     Complete line of Sunbrela fabrics. We also custom sew beautiful cushions from Sunbrella.
Custom Cushions     Custom cushions sewn at a high level of craftsmanship. Choose from fabrics and a range of quality foam.

: Check out CoachTrim's Advanced Leather Workshop and Basic Sewing Course on Suppliers Page
***Please click here www.facebook.com/upholster.upholstery and click "LIKE" for our UPHOLSTER Facebook business page (it will help me promote this free site)-Ken***

 EZ Foam Cutters with 240 volts and plugs for Australia, New Zealand and UK and EU.
SPECIAL 110V MODELS $130 (limited time!!) http://www.upholster.com/toolkits/Foam-cutter.html

+  My Community
|-+  General Upholstery Questions and Comments
| |-+  General Discussion
| | |-+  Cheap vinyl?
« previous next »
: [1]
: Cheap vinyl?  ( 136 )
YaBB God

Karma: +2/-0
: 3171

« : July 19, 2019, 10:41:31 PM »

I'm giving an estimate for 8 leather barrel back chairs with decorative tacks. The customer wants faux leather vinyl, which I think is fine.

I suggested $30 to $50 per yard vinyl with 75,000 to 100,000 rubs. He was going to pay for the vinyl separately.

He got two other bids that only have the decorative tacks around the arms and not around the base of the chair. He also has chosen EZ Vinyl, which you can buy at Joann Fabrics. It has 50,000 rubs. It also has a polyester backing. The label says it's for marine, indoor commercial, home.

The 8 chairs are used in the companies cafeteria.

He wants me to resubmit my estimate with the tacks only around the arms and include the EZ vinyl.

I'm thinking the EZ Vinyl will be OK, but is not the best choice. Any thoughts on why I might want to not put my name on EZ Vinyl?

This type of chair:




I do not know what the other bids are. And I don't care to know.
« : July 19, 2019, 10:43:25 PM gene »

YaBB God

Karma: +2/-0
: 2233

Mainly furniture. Tarpon Springs Fl.

« #1 : July 20, 2019, 05:24:41 AM »

When a customer specs a certain product it is on them. As long as it is stated this is what is you want in the paperwork what else can you do. I would explain that EZ isn't very good vinyl and that's it. It is his or her choice. All we can do is educate.

Minichillo's Upholstery
YaBB God

Karma: +4/-1
: 1613

« #2 : July 20, 2019, 07:05:30 AM »

Nice chairs for a cafeteria - I would advise him to buy several extra yards so you can redo areas as they fail.  I doubt anyone equates faulty fabric with your skill set.  Definitely do the job without pause.
Next is the bosses house where you'll use the good stuff I'm sure
YaBB God

Karma: +3/-0
: 3173

North Central Florida

« #3 : July 21, 2019, 02:56:16 PM »

One thing to consider is the workability of EZ vinyl. I'm not familiar with the brand EZ but I can tell you some vinyl's at JoAnn's are very thin and very stretchy. Especially the type with the fuzzy backing.

On the chair in your link there are two areas that will require some stretching to get the puckers out. First place is where the arm curves up to the back. You will have to cut relief slits into the fabric. Then pull both up and down to get the fabric to stretch into place while leaving no puckers. On a cheaper and thin vinyl those relief slits will want to tear if stretched too far. You can use heat or steam but be careful not to use too much that it will cause the vinyl to separate from the backing.

Same thing where the side of the seat curves around the back. I don't know if there are any pleats back there. If there are not It will take a lot of heat and stretching to get the puckers out.

I'm saying this from experience and I'm sure you know what I'm talking about. Sometimes trying to save the customer a little money puts more work on you. I would ask for a sample or go to JoAnns and check it out yourself. Check out the thickness of the vinyl compared to other vinyl's. If the top layer is thin you can show the customer.
« : July 21, 2019, 03:02:58 PM kodydog »

There cannot be a crisis next week. My schedule is already full.
YaBB God

Karma: +2/-0
: 4263

I'm Always In Trouble

« #4 : August 01, 2019, 05:42:32 AM »

We now and again will have a customer demand we use Sunbrella. We typically give them what they want but explain we will not warrant Sunbrella and if there is a problem they have to deal directly with Sunbrella.

I would do the same and explain you wont warrant the EZ vinyl.


YaBB God

Karma: +3/-0
: 3173

North Central Florida

« #5 : August 01, 2019, 08:53:59 AM »

When bidding against other shops, some customers are more impressed with knowledge rather than price. If the other shops have a "whatever" attitude toward the fabric choice but you show your expertise and experience working with different fabrics... often the customer will pick the more expensive shop who has more knowledge and better service. Kind of a value added thing. We're too busy to spend a lot of time with customers who indicate they are shopping price only.
« : August 01, 2019, 08:55:24 AM kodydog »

There cannot be a crisis next week. My schedule is already full.
Jr. Member

Karma: +0/-0
: 60

« #6 : Today at 06:17:44 PM »

My question is...If an entire NEW chair costs $47, why does the customer think you can reupholster them for less than that cost?  I KNOW I couldn't and wouldn't
: [1]  
« previous next »

Latex Mattress    Foam Order allows you to design your own latex mattress using layers of certified natural and organic components.
Organic Mattress     Foam Order makes a wonderful organic mattress using certified natural and organic components. Choose your own firmness.
SMF 2.0.14 | SMF © 2017, Simple Machines