June 02, 2020, 06:21:50 pm


Check out CoachTrim's Advanced Leather Workshop and Basic Sewing Course on Suppliers Page
***Please click here www.facebook.com/upholster.upholstery and click "LIKE" for our UPHOLSTER Facebook business page (it will help me promote this free site)-Ken***

EZ Foam Cutters with 240 volts and plugs for Australia, New Zealand and UK and EU.
SPECIAL 110V MODELS $130 (limited time!!) http://www.upholster.com/toolkits/Foam-cutter.html

Pieces of foam stuck to chair frame

Started by Bowen, February 24, 2017, 10:31:06 pm

Previous topic - Next topic


February 24, 2017, 10:31:06 pm Last Edit: February 24, 2017, 10:34:16 pm by Bowen
My chair has foam rubber glued to the wood frame and canvas-type material. Staples and foam pulled out ok but left behind large patches and bits of foam. How do I remove the rest of the foam? I scrubbed with a stiff brush and water but could only loosen small particles. Also tried loosening it up with a hot iron and hair dryer, and Sccr aping it off with a scraper and razor blade but none of these methods worked. Any suggestions? Should I just give up and lay down a new foam layer on top of it?


If all you have left are small chunks that just won't let go, then yes. Just glue your new foam right over them. If your new foam is at least 2" thick, the old bits of foam won't show.
"Perfection is the greatest enemy of profitability" - Mark Cuban